What media can RADD work with?

(This list is current as of January 27, 2017.)

Still image media

  • Slides
  • 35mm film [caution: filmstrips and long film rolls are cumbersome to work with]

Audio media

Some of the playback equipment listed below is small, low-use, expensive and/or rare, and portable, ergo locked up. If you need it, please speak to Dorothea Salo in advance. Thank you!

  • Microcassettes
  • Minicassettes [player locked away]
  • Standard audio cassettes
  • Digital audio tape (DAT)
  • Alesis digital audio tape (ADAT) [caution: this machine has not yet been tested due to lack of media]
  • Sony mini-discs [player locked away]
  • 33 1/3 rpm, 45 rpm, 78 rpm vinyl records
  • Coming soon: most speeds of reel-to-reel tape (machine awaiting a final repair)

Video media

  • VHS and VHS-C tapes
  • U-Matic tapes
  • Betamax tapes
  • Betacam tapes
  • Mini-DV (camcorder) tapes
  • Hi8 tapes
  • Digital8 tapes

(RADD does not currently work with 8mm, Super8, or 16mm film. Try Holder PrintWorks. We also do not currently have DVCAM playback equipment.)

Digital media

  • Most 5.25″ floppy diskettes in most filesystems (“flippy” disks will not work)
  • 3.5″ floppy diskettes, including Mac-formatted diskettes
  • Iomega Zip disks
  • Iomega Jaz disks
  • IMation SuperDisks
  • Most hard drives

Coming soon (awaiting a working SCSI setup):

  • SyQuest SparQ disks
  • SyQuest EZFlyer disks

Bodging a case for a 5.25″ floppy drive

Most digital data-rescue kits will want a 5.25″ floppy drive. The main difficulty with these is that extant ones are practically all designed to be installed inside a computer case. To ship one safely, it makes sense to find an enclosure for it.

As best we know, no enclosure is available for purchase ready-designed for a single 5.25″ floppy drive and its connectors. (RADD uses this dual-drive enclosure, which works fine but is rather too heavy to ship.) The best anyone can do is bodge one.

To match PROUD’s setup, you will need:

  • A drive. The usual recommendation is a TEAC FD55-GFR, though other drives may work also.
  • A drive controller. Your options are a Kryoflux (lovely, but very expensive) or Device Side Data’s small USB controller card, which comes with the needed ribbon cable to connect it to the drive.
  • A power source for the drive. Device Side Data sells one that works just fine.
  • A standard USB A/B cable (one end squarish, one end rectangular) to connect the controller card to the computer.
  • A case! Look for a case that fits a full-height CD or DVD (“optical”) drive. Key to making this work: the rear panel must be either dispensable or plastic. A case with a metal rear panel will not work, unless you have access to metal-cutting gear.
  • A small-bladed hacksaw or jab saw.

PROUD is using this CoolGear enclosure. This Addonics enclosure has also been recommended.

The exact manner of putting the drive and enclosure together depends on the exact enclosure chosen, but here is the basic idea:

  1. Disassemble the enclosure. Rip out all fans, cards, and cables in the rear of the enclosure; you will not need them. (Some will be glued in; pry out the glue blobs.)
  2. Put the drive into the enclosure, lining up the front of the drive with the enclosure front. (A little electrical tape may keep the drive in line better; not all drives and all enclosures can be screwed together, unfortunately.)
  3. Look at the back of the enclosure and the back of the drive. Decide how much needs to be sawed off the rear panel to fit the power cord and ribbon cable through.
  4. Once everything fits, reassemble the entire enclosure. (If possible, mount the FC5025 card inside the enclosure, but that plus the ribbon cable is very likely too large to fit.) Electrical tape can help steady the power cable and cover sawed-off edges.
  5. Plug the ribbon cable into the FC5025 card, then wrap the cable’s extra folds around it (leaving the USB jack clear), to provide the card a little protection. (In our experience, this card is quite durable, but every little bit helps.)

The result is not beautiful, but it is functional.

PROUD: Equipment and software roster

Equipment included in the PROUD digital-data rescue kit:

  • HP EliteBook 8460p laptop computer with power cable, running Windows 7 Professional
  • Forensic ComboDock with all associated cables
  • 3.5″ USB floppy drive
  • 5.25″ floppy drive (TEAC FD55-GFR) in an enclosure, powered by this cable
  • FC5025 USB floppy controller card, attached to 5.25″ drive via included ribbon cable
  • Iomega 250MB USB Zip drive

Installed software: